9002 model numbers ac control a24110 a24125 ha48110 ha48125 d c c ontrol d24110 d24125 hd48110 hd48125 output specifications operating voltage (47-63 hz) [vrms] 24-280 24-280 48-530 48-530 max. load current a [arms] 110 125 110 125 min. load current, [marms] 150 150 150 150 transient overvoltage [vpk] 600 600 1200 1200 max. surge current, (16.6ms) [apk] 1500 1750 1500 1750 max. on-state voltage drop @ rated current [vpk] 1.7 1.7 1.7 1.7 thermal resistance junction to case (r q jc ) [?c/w] .25 .22 .25 .22 maximum i 2 t for fusing, (8.3 msec.) [a 2 sec] 9,340 12,700 9,340 12,700 max. off-state leakage current @ rated voltage [marms] 10 10 10 10 min. off-state dv/dt @ max. rated voltage [v/?ec] 500 500 500 500 max. turn-on time ? 1/2 cycle (dc control), 10.0 msec (ac control) max. turn-off time 1/2 cycle (dc control), 40.0 msec (ac control) power factor (min.) with max. load 0.5 0.5 0.5 0.5 input specifications dc control ac control ac control (d prefix) (a prefix) (e suffix) control voltage range 3-32 vdc 90-280 vrms (60hz) 18-36 vrms max. reverse voltage -32 vdc --- --- max. turn-on voltage 3.0 vdc 90 vrms 18 vrms min. turn-off voltage 1.0 vdc 10 vrms 4.0 vrms nominal input impedance 1500 ohms (120/240v models) ? 60k ohms 9.0k ohms typical input current 3.4ma @ 5 vdc, 20ma @ 28vdc ? 2ma @ 120 vrms, 4ma @ 240 vrms 3ma @ 24 vrms general notes all parameters at 25? unless otherwise specified. off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 a heat sinking required, for derating curves see page 2. ? turn-on time for random turn-on versions is 0.02 msec (dc control models). ? input circuitry for 480v models incorporates active current limiter with 2ma typical input current.. zero voltage and random turn-on switching panel mount internal snubber fastfax document no. 152 110/125.040898, page 1 of 2 featuring state-of-the-art surface mount technology, these spst-no relays deliver proven reliability in the most demanding applications. output consists of an scr ac switch and is available in zero-cross, random turn-on (phase controllable) and ver- sions with either ac or dc input (coil) control. manufactured in crydom? iso 9002 certified facility for optimum product performance and reliability. series 1 - 110/125a 120/240, 480 vac ?ac output ?998 crydom corp, specifications subject to change without notice. for recommended applications and more information contact: usa: (800) 8 crydom ? (800) 827-9366 ?(619) 715-7200 ?fax (619) 715-7280 crydom corp, 9525 chesapeake drive, san diego, ca 92123 ?e-mail: sales@crydom.com web site: http://www.crydom.com fastfax product information: (888) 267-9191 uk: (44)1202 812300 ? fax (44)1202 812340 crydom international ltd., 85, condor close, woolsbridge industrial estate, three-legged cross. wimborne, dorset, england bh21 6su germany: (49)871 935405 ? fax (49)871 935407, aussere parkstr.5, d-84032 altdorf, germany
160 80 40 120 0 30 60 120 0 90 20 40 60 80 load current [arms] max ambient temp. [?] power dissipation 100 110 120 base plate temp [?] 125a .5?/w .4?/w 90 1?/w .2?/w 160 80 40 120 0 30 60 120 0 90 20 40 60 80 load current [arms] max ambient temp. [?] power dissipation 100 110 120 base plate temp [?] 110a .5?/w .4?/w 90 1?/w .2?/w 1.87 (47.5) .78 (19.8) 2.30 (58.4) 1.70 (43.2) .90 (22.9) .45 (11.4) 1.10 (27.9) 8-32 terminal (2 places ) 1.00 (25.4) 6-32 terminal (2 places) 1.80 (45.7) solid-state relay 12 output 3 4 + -- input mounting hole/slot 0.17 (4.3) dia. base plate .125 (3.2) fastfax document no. 152 110/125.040898, page 2 of 2 current derating curves series 1 - 110/125a 120/240, 480 v ac ?ac output available options e 24 vac input (18-36 vac) example: a24110e -10 random turn-on (ac & dc control) phase controllable (dc control) example: d24110-10 general specifications dielectric strength 50/60hz input/output/base 4000 vrms insulation resistance (min.) @ 500 vdc 10 9 ohm max. capacitance input/output 8 pf ambient operating temperature range -40 to 80? ambient storage temperature range -40 to 125? mechanical specifications weight: (typical) 3.0 oz. (86.5g) encapsulation: thermally conductive epoxy terminals: screws and saddle clamps furnished, unmounted approvals ul e116950 crydom heat sinks offer excellent thermal management and are per - fectly matched to the load current ratings of crydom panel mount relays. request crydom? heat sink specification sheet for all the details. 9002 ?998 crydom corp, specifications subject to change without notice. for recommended applications and more information contact: usa: (800) 8 crydom ? (800) 827-9366 ?(619) 715-7200 ?fax (619) 715-7280 crydom corp, 9525 chesapeake drive, san diego, ca 92123 ?e-mail: sales@crydom.com web site : http://www.crydom.com fastfax product information: (888) 267-9191 uk: (44)1202 812300 ? fax (44)1202 812340 crydom international ltd., 85, condor close, woolsbridge industrial estate, three-legged cross. wimborne, dorset, england bh21 6su germany: (49)871 935405 ? fax (49)871 935407, aussere parkstr.5, d-84032 altdorf, germany screw torque requirements: 6-32 screws - 10 in./lbs., 8-32 and 10-32 screws - 20in./lbs. (screws dry without grease.) all dimensions are in inches (millimeters)
|
